| Customization: | Available |
|---|---|
| Type: | Speed Table |
| Material: | Rubber |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Red or Black Rubber Road Safety Speed Cushion for car
Eastsea's speed cushion - speed table safely control traffic and reduce vehicle speeds to 20-30 mph with RubberForm Speed Cushions. Made from 100% recycled rubber tires, our high-traction speed cushions are highly visible and extremely durable. Unlike a traditional traffic calming devices, our speed cushion is designed to slow traffic while having a minimal effect on emergency response time. Easy-to-install, modular sections. Place them strategically on streets, residential thoroughfares and pedestrian zones; In parking lots and parking garages; And at schools, universities, hospitals and apartment complexes. Our speed cushions quietly and effectively slows traffic without vehicle or tire damage. Increases pedestrian safety. Installs easily with lag bolts. Simply drill a hole with a masonry bit and penetrate the asphalt or concrete surface below. Removable for road surface maintenance. In addition, adding speed cushions typically reduces traffic volume approximately 20% on cut-through sreets.
Features:
(1)Embedded reflective material increases visibility and safety, day or night.
(2)Channeled bottom provides drainage and protects wires, cabling or piping.
(3)All-weather easy maintenance: Will not warp, chip, crack, crumble or corrode.
(4)Extremely durable: Tough enough for heavy traffic.
(5)Resistant to extreme temperature variations, UV light, oils, moisture and damage.
(6)Flexible: Conforms to road curvature and any asphalt or concrete surface.
(7)Easy to remove and relocate, for temporary or permanent installation.
(8)Easy, one-person installation with basic tools. Installs securely with provided installation hardware.
Production Specification:
| Model No | Length | Width | Height | Wight |
| DH-SP-4(2M) | 2000mm | 1800mm | 75mm | 200KG |
| DH-SP-4(3M) | 3000mm | 1800mm | 65mm | 280KG |
| Model No | Length | Width | Height | Wight | Set |
| DH-SP-4(2M) | 2000mm | 1800mm | 75mm | 200KG | |
| DH-SP-4(3M) | 3000mm | 1800mm | 65mm | 280KG | |
| DH-SP-4GB[3M] | 300cm | 180cm | 6.5cm | 300kg | 6 piece per set |
| DH-SP-4GR[3M] | |||||
| DH-SP-4GB[2M] | 200cm | 200kg | |||
| DH-SP-4GR[2M] | |||||
| Model No | Dimension | Parts | Weight | Accessories | |
| DH-RST-1[6*3] | 6Meter * 3Meter | 20 * Black Middle | 1100kg | "I" Connector | |
| 20 * White Middle | Screws Caps | ||||
| 28 * End Cap | |||||
| 4 * Corner Piece | |||||
| DH-RST-1[7*4] | 7Meter * 4Meter | 42 * Black Middle | 1880kg | "I" Connector | |
| 42 * White Middle | Screws Cap | ||||
| 40 * End Cap | |||||
| 4 * Corner Piece | |||||
| Model No | Length | Width | Height | Weight | Dimension |
| DH-SP-4UB[3M] | 300cm | 180cm | 6.3cm | 360kg | 1000*900*63mm |
| DH-SP-4UR[3M] | |||||
| DH-SP-4UB[2M] | 200cm | 220kg | |||
| DH-SP-4UR[2M] | |||||
| Model No | Dimension | PARTS | Weight | Accessories | |
| DH-PCI[2X2]] | 2Meter X 2Meter | 4 x Middle | 24 x"I" Connector | ||
| 8 x End Cap | 64 x Screws Caps | ||||
| 4 x Corner Piece | |||||
| DH-PCI[3X3] | 3Meter X 3Meter | 16 x Middle | 60 x"I" Connector | ||
| 16 x End Cap | 144 x Screws Caps | ||||
| 4 x Corner Piece | |||||
| DH-PC[6X3] | 6Meter X 3Meter | 20 x Black Middle | 1100Kg | "I" Connector | |
| 20 x White Middle | Screws Caps | ||||
| 28 x End Cap | |||||
| 4 x Corner Piece | |||||
| DH-PC[7X4] | 7Meter X 4Meter | 42 x Black Middle | 1880Kg | "I" Connector | |
| 42 x White Middle | Screws Caps | ||||
| 40 x End Cap | |||||
| 4 x Corner Piece | |||||
| Separate Parts Spec: | |||||
| Model No | Part | Dimension | Weight | Accessories | |
| PC-B | Black Middle | 500x500x70MM | 15KG | ||
| PC-W | White Middle | 500x500x70MM | 15KG | "I"Connector | |
| PC-E | End Cap | 500x500x70MM | 10KG | Screws Caps | |
| PC-R | Corner | 500x500x70MM | 10KG | ||
){kind=link}